Flood Auckland and Carpet Drying Guide
In case there is still standing water, these flood restoration tips are better than not doing anything.
Implement caution when first entering your home.
It is practical to wear rubber boots and gloves, one of the best flood restoration tips. Please switch the electricity off at the breaker box and get all electrical appliances and extension cords up on higher ground to dry them out. Be certain your home is structurally safe, which means looking out for broken sharp objects on the floor and anything you might trip over. Call the flood experts asap to dry carpet and structure asap before mold and rot begins.
Boil all drinking water or use bottled water.
All drinking water ought to be either boiled, put through a water purifier or use bottled water. Areas that are dry but have been exposed to sewage should be thoroughly washed down using a solution of household bleach and water. We suggest a 25% bleach to water solution.
When in doubt, throw it away.
The other good flood restoration tips, toss out all water damaged rugs, particle board furniture, mattresses, suitcases, food, even photographs and books, and adhere to your local authority guidelines for disposal. Guide for flood drying. A lot of electrical appliances will not survive if they have been submerged in water. Dishwashers, refrigerators and vacuum cleaners are less expensive to replace than repair. Make use of rubber gloves and mask when cleaning loose debris, so as not to inhale any toxic particles.
Wash and dry everything as much as possible.
This includes water soaked bedding, towels, drapes, cushions and clothing using the hot sanitizing cycle on your washing machine. Dry clean heat sensitive textiles. Put dishes through the dishwasher on hot cycle.
Get rid of remaining water and dehumidify damp areas.
Clean up the last standing water with a portable submersible sump pump and a wet dry vac. Then use a high capacity, low temperature dehumidifier to take care of the rest. An auxiliary or built in pump makes this task a lot easier. It is important to open windows and ventilate rather than turn on the heat high [about 50F] in the house or use fans, which is an invitation to grow mold spores and spread them around the house. Do not try to dry out the house too hurriedly, because if you do it will cause wood floors to warp and buckle. Get the experts to dry carpet properly so you don’t have mold surprises and long term smell issues.
Clean all surfaces thoroughly.
Wash down all surfaces, such walls, cabinets, basement floors, including those which were not in direct contact with your bleach solution. Then, wipe down with clear water. Using a vapor steam cleaner on all surfaces to disinfect is an even better solution.
Check for interior and structural damage.
Remove dry wall up to and 2 feet above flood restoration moisture levels on walls and remove all insulation which came in contact with flood waters. It is imperative to do this if you want to avoid future mold problems. We have heard too many horror stories from people whose houses became infested with toxic mold – so it is not worth taking a chance and skipping this step. Replace hardwood flooring especially all sub floors if they have been flood soaked. Keep ventilating with fresh air until the house is completely dry. Have the duct work professionally cleaned after the house has dried out. Flood tip: Make sure the flood restoration company uses good moisture meters, so, you don not have mold growth later.
Inspect your electrical and plumbing systems.
Have an HVAC professional inspect your electrical systems and appliances. Replace all filters and switches. Check your furnace, as a burnout of the motor may be imminent. Be certain your plumbing and toilet facilities are working.These flood restoration tips are provided to you from Graeme Stephens an IICRC 2001 Master Restoration Technician. To help you best dry carpet flood for your home, and also, save on unnecessary replacement costs. For the the flood carpet drying experts, call 0800 783-266, or email Auckland Steam n Dry